Books

  • Syed Abdullah Nauroze, Novel On-Chip Antennas for 77GHz Automotive Radars. LAP Lambert Academic Publishing GmBH & Co., Germany, 2013, ISBN 978-3-8433-6542-0

Book chapters

  • Y. Cui, S. A. Nauroze, and M. M. Tentzeris, “Origami-inspired 4D RF and wireless structures and modules,” in 4D-Printed Smart Materials and Structures. Elsevier, 2022, vol. 1
  • M. M. Tentzeris, A. Eid, T. H. Lin, J. G. Hester, Y. Cui, A. Adeyeye, B. Tehrani, and S. A. Nauroze, “Inkjet-/3D-/4D-printed Nanotechnology- enabled Radar, Sensing, and RFID Modules for Internet of Things,“Smart Skin,” and “Zero Power” Medical Applications,” in Antenna and Sensor Technologies in Modern Medical Applications. Wiley Online Library, 2021, pp. 399–434
  • A. Adeyeye, A. Eid, J. Hester, S. A. Nauroze, B. Tehrani, Y. Cui, and M. M. Tentzeris, “Inkjet-/3D-/4D-printed Wireless Ultrabroadband Modules for IoT, Smartag and Smart City Applications,” in Nanotechnology for Electronics, Photonics, Biosensors, and Emerging Technologies. World Scientific, 2021, pp. 41–49
  • Larissa Novelino, Syed Abdullah Nauroze, Manos Tentzeris, and Glaucio H. Paulino, “Multiphysics Origami: Achieving Tunable Frequency Selective Surfaces from Origami Principles”, Origami7: Seventh International Meeting of Origami Science, Maths, and Education, Tarquin, vol. 3, 2018.
  • Manos Tentzeris, Syed Abdullah Nauroze, “Flexible RF Components and Sensors Using Inkjet-printing Technologies”, Wiley Encyclopedia of Electrical and Electronics Engineering: Wiley, 2017.

Journals

  • Y. Cui, T. Cheng, R. Bahr, S. A. Nauroze, T. S. S. Almoneef, and M. M. Tentzeris, “3D printed deployable bi-focal beam-scanning dielectric reflectarray antenna for mm-wave applications,” Transactions on Antennas and Propagation, 2022
  • Syed Abdullah Nauroze, Manos Tentzeris. “A Thermally Actuated Fully Inkjet-printed Origami-inspired Multi-layer Frequency Selective Surface with Continuous-range Tunability Using Polyester-based Substrates”, IEEE Trans. Microw. Theory Tech., vol. 67, no. 12, pp. 4944-4954, Dec. 2019.
  • Syed Abdullah Nauroze, Manos Tentzeris, Larissa Novelino, Glaucio H. Paulino. “Continuous-range Tunable Multi-layer Frequency Selective Surfaces Using Origami and Inkjet-printing”, Proceedings of the National Academy of Sciences (PNAS), 2018.
  • Adeyeye, Ajibayo, et al. “Additively Manufactured Inkjet-/3D-/4D-Printed Wireless Sensors Modules”, International Journal of High-Speed Electronics and Systems 27.01n02 (2018): 1840012.
  • Syed Abdullah Nauroze et al. “Additive Manufactured RF Components and Modules: Towards Empowering the Birth of Cost-efficient Dense and Ubiquitous IoT Implementations”, in Proc. IEEE, vol. 105, no. 4, pp. 702-722, April 2017.
  • Jo Bito et. al. “A novel solar and electromagnetic energy harvesting system with a 3-d printed package for energy efficient internet-of-things wireless sensors”, IEEE Trans. Microw. Theory Tech., vol. 65, no. 5, pp.1831-1842, 2017.
  • Bito, Jo, et al. “Inkjet-/3D-/4D-printed autonomous wearable RF modules for biomonitoring, positioning and sensing applications”, Micro-and Nanotechnology Sensors, Systems, and Applications IX. Vol. 10194. International Society for Optics and Photonics, 2017.
  • Rashad Ramzan, Omar Siddiqui, Abdullah Nauroze, Omar Ramahi. “A Microstrip Probe Based on Electromagnetic Energy Tunneling for Extremely Small and Arbitrarily Shaped Dielectric Samples”, IEEE Antennas Wireless Prop. Lett., vol. 14, pg. 1554-1556, March 2015.

Conferences

  • M. Holda, Y. Cui, S. A. Nauroze, M. Tentzeris, and P. Dahmen, “Pop-up card inspired, 3D-printed corner reflector antenna—a novel deployable antenna,” in 2021 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2021
  • Y. Cui, S. A. Nauroze, R. Bahr, and M. M. Tentzeris, “A novel additively 4D printed origami-inspired tunable multi-layer frequency selective surface for mm-wave IoT, RFID, WSN, 5G, and Smart City Applications,” in 2021 IEEE MTT-S International Microwave Symposium (IMS). IEEE, 2021, pp. 86–89
  • Y. Cui, S. A. Nauroze, R. Bahr, and E. M. Tentzeris, “3D printed one-shot de- ployable flexible “kirigami” dielectric reflectarray antenna for mm-wave appli- cations,” in 2020 IEEE/MTT-S International Microwave Symposium (IMS). IEEE, 2020, pp. 1164–1167
  • Syed Abdullah Nauroze, Manos Tentzeris, “Fully Inkjet-printed Multi-layer Tunable Origami-FSS Structures with Integrated Thermal Actuation Mechanism”, IEEE-MTS Int. Microwave Symposium (IMS), Boston, USA, 2019, pp. 1363-1366 (Honorary mention: 3MT and best student paper competitions)
  • S. A. Nauroze, X. He and M. Tentzeris, “Fully Additively Manufactured Tunable Active Frequency Selective Surfaces with Integrated On-package Solar Cells for Smart Packaging Applications”, 2019 IEEE 69th Electronic Components and Tech. Conference (ECTC), Las Vegas, NV, USA, 2019, pp. 119-125.
  • Yepu Cui, Syed Abdullah Nauroze, Manos M. Tentzeris, “Novel 3D-Printed Reconfigurable Origami Frequency Selective Surfaces with Flexible Inkjet-Printed Conductor Traces”, IEEE-MTS Int. Microwave Symposium (IMS), Boston, USA, 2019.
  • Syed Abdullah Nauroze, Manos Tentzeris, “Fully Inkjet-printed Tunable Hybrid n-Ripple Miura (n-RiM) Frequency Selective Surfaces”, IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (APS - URSI), Atlanta, 2019.
  • A. Eid et al., “A Flexible Compact Rectenna for 2.4GHz ISM Energy Harvesting Applications”, 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, Boston, MA, 2018, pp. 1887-1888.
  • Syed Abdullah Nauroze, Aline Eid, Manos Tentzeris “n-RiM: A Paradigm Shift in Realization of Fully Inkjet-printed Broadband Tunable FSS using Origami Structures”, IEEE-MTS Int. Microwave Symposium (IMS), Philadelphia, USA, 2018 (3MT competition winner)
  • Syed Abdullah Nauroze, Bijan Tehrani, Manos Tentzeris, “An Inkjet-printed Origami-based Frequency Selective Surface with Wide Frequency and Bandwidth Tunability”, IEEE Intl. Symp on Antennas and Prop & USNC-URSI National Radio Science Meeting (APS - URSI), Boston, 2018.
  • Bijan Tehrani, Syed Abdullah Nauroze, Ryan Bahr, Manos Tentzeris, “On-Package mm-wave FSS Integration with 3D-Printed Encapsulation”, IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (APS-URSI), San Diego, 2017.
  • H. Griguer, M. Tentzeris, A. Nauroze and M. Drissi, “A novel ultra-thin flexible metamaterial absorber for human body protection from EMF hazards,” 2017 32nd General Assembly and Scientific Symp. of the Intl Union of Radio Science (URSI GASS), Montreal, QC, 2017, pp. 1-4. (Gold medalist for 20th Archimedes IP Salon)
  • W. Su, R. Bahr, S. A. Nauroze and M. M. Tentzeris, “Novel 3D-printed “Chinese fan” bow-tie antennas for origami/shape-changing configurations,” 2017 IEEE Int. Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, San Diego, CA, 2017, pp. 1245-1246.
  • Syed Abdullah Nauroze, Manos Tentzeris, Larissa Novelino, Glaucio H Paulino “Inkjet-printed “4D” Tunable Spatial Filters Using On-demand Foldable Surfaces”, IEEE-MTS Int. Microwave Symposium (IMS), Hawaii, USA, 2017 (3MT competition finalist)
  • Wenjing Su, Syed Abdullah Nauroze, Ryan Bahr, Manos Tentzeris “Novel 3D printed Liquid-metal-alloy Microfluidics-based Zigzag and Helical Antennas for Origami Reconfigurable Antenna “Trees”, IEEE-MTS Int. Microwave Symposium (IMS), Hawaii, USA, 2017.
  • R. Bahr, A. Nauroze, W. Su and M. M. Tentzeris, “Self-actuating 3D Printed Packaging for Deployable Antennas,” 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), Orlando, FL, 2017, pp. 1425-1430.
  • Syed Abdullah Nauroze, Jimmy Hester, Wenjing Su, Manos Tentzeris, “Inkjet-printed substrate Integrated waveguides (SIW) with “drill-less” vias on paper substrates”, IEEE-MTS Int. Microwave Symposium (IMS), San Francisco, USA, 2016.
  • Syed Abdullah Nauroze et al., “Additive manufacturing technologies for near- and far-field energy harvesting applications”, Radio & Wireless Symp (RWS) 2016 IEEE, pp. 159-161, 2016.
  • W. Su, R. Bahr, S. A. Nauroze and M. M. Tentzeris, “3D printed reconfigurable helical antenna based on microfluidics and liquid metal alloy,” 2016 IEEE International Symposium on Antennas and Propagation (APSURSI), Fajardo, 2016, pp. 469-470.
  • A. Nauroze, M. Tentzeris, “A Novel Printed Stub-loaded Square Helical Antenna”, IEEE Int. Sym. on Antenna and Prop. and USNC-URSI National Radio Science Meeting (APS-URSI), pp. 774-775, 2015.
  • A. K. Rashid, S. Ullah, and S. A. Nauroze, “Three-dimensional loaded dipoles for applications in frequency selective structures,” in Proc. Prog. Electromagn. Res., China, 2014, pp. 1763–1766.
  • O. Sidiqui, A. Nauroze, R. Ramzan and O. Ramahi, “Tunneling of electromagnetic energy through wires in guided media,” 2013 IEEE Int. Sym. on Ant. and Prop. (APS-URSI), Orlando, FL, 2013, pp. 1370-1371.
  • Nauroze Syed, “In-wafer Helical Antenna for Automotive Radar”, IEEE 7th European Conference on Antenna & Propagation (EuCAP), Gothenburg, Sweden, April 2013.
  • Abdullah Nauroze, Omar Sidiqui, Rashad Ramzan and Omar Ramahi, “Energy Tunneling in Wire-loaded Microstrip Cavities”, IEEE Int. Conf. on Meta Materials, Photonic Crystals and Plasmonics (META), 2013.
  • Ben Slimane, S.; Xuesong Li; Bo Zhou; Nauroze Syed; Dheim, “Delay Optimization in Cooperative Relaying with Cyclic Delay Diversity”, IEEE International Conference on Communications, pp. 3553-3557, May 2008.

Workshops

  • Origami-inspired shaped reconfigurable tunable RF structures using additive manufacturing technologies – IEEE International Symposium on Antenna and Propagation (APS-URSI), Atlanta, GA, 2019.
  • Next generation of origami-based tunable RF structures using additive manufacturing – FlexTech Conference, Monetary, CA, 2017